NAKLEJKA NA SŁUPEK AUTA “SZARY BATMAN” FOLIA PREMIUM 50×25
$15.63
- Unikalna naklejka na słupek samochodowy
- Drukowana na folii premium i idealna do tuningu wizualnego pojazdu.
- Rozmiar: 50×25 cm, co czyni ją dopasowaną dla wszystkich rozmiarów słupków
- Materiał: folia samoprzylepna z lamniatem ochronnym UV
Remember , that our stickers are:
Professional German film
Stickers are made of flexible film, which fits perfectly to the post of the car. It will last up to 10 years - without cracking, fading or peeling off. Works well in all conditions.
UV laminate - matt / gloss
We apply a UV laminate to each sticker to protect it from sunlight, rain, snow and scratches. As a result, the colors remain intense and the design looks fresh for a long time.
Easy bonding without bubbles
Thanks to the technology with channel glue, installing the sticker is trivial - even if you are doing it for the first time. Zero bubbles, zero stress. Simple, easy and fun.
Photo quality printing
We print the designs on EPSON machines using genuine inks that capture the finest details and depth of color.
The effect? The sticker looks like a work of art - and impresses everyone.
Limited editions
Most patterns are released only once and in limited quantity. Once they run out - they disappear forever. Don't wait, because what's available today may be out of stock tomorrow.
How to install the sticker? It's easy!
Clean the surface
Clean and degrease the surface before sticking. Remember not to leave dust, sand, dust. It may deform the sticker later.
Degrease the surface using a 70% solution of isopropyl alcohol with water. Do not use extraction gasoline.
Start taping
Peel off the backing paper to about 1/4 of its height. Position the sticker on the post. Glue the top and start gluing the rest with the included squeegee.
Trowel the surface from the top slowly peeling off the remaining backing paper. If a small bubble remains, spread it out with the squeegee. If a crease appears, gently pull up the sticker.
Cut off the excess
After gluing, press down all the edges. With the provided cutter, start cutting the film along the edges of the pillars. Peel off the excess and cut the sticker between the front and rear doors. Tighten all edges.
Note: The knife is sharp so be careful not to cut yourself. When cutting the film, use it with feeling. Pressing too hard may damage the bodywork or seals.
Related products
